Getting Started - Updating your Structure Sensor 3 Firmware

To ensure your best possible experience, we suggest updating your firmware upon receiving your sensor.

To make sure your firmware is up to date, please follow these steps:

  1. Download the Structure app from the App Store.
  2. Disconnect your sensor and launch Structure with the sensor disconnected.
  3. Connect your sensor when prompted.
  4. Wait. Sensor initialization can take 5 seconds or so

  1. Once initialized, tap the "i" icon in the upper right corner.

  1. If your sensor has a firmware update available, you will see a blue button.

  1. Tap the blue banner to begin the firmware update process


  1. Your sensor should now be updated. Click "Continue"


Here is a video tutorial for reference as well: https://www.youtube.com/watch?v=3CvxTz3wMdA


Note: If your sensor says "Process Finished" but does not get to the "Update Successful" you can unplug the sensor and restart the app after 1 minute.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.